Report The 360 View: Optimizing Parallels Settings for Autodesk BIM 360 Glue / Autodesk Navisworks

Optimizing Parallels Settings for Autodesk BIM 360 Glue / Autodesk Navisworks



Optimizing Parallels Settings for Autodesk BIM 360 Glue / Autodesk Navisworks

I switched to an Apple Macbook Pro three years back and has been using it ever since at work and home. Running BIM 360 Glue or Navisworks in a Windows virtual machine using Parallels has become such a breeze that I barely have to pause. It took me a while to understand the settings initially and some additional trial and error to identify what i believe to be the key parameters. I thought of sharing in this post some of these lessons learned in optimizing Parallels settings for use with BIM 360 Glue or Navisworks.
Glue-clash-view
Autodesk BIM 360 Glue on a Macbook Pro running Parallels 10 and Windows 8.1
The above screenshot shows the Clash Resolution workflow of Glue in action. I have a 2013 Macbook Pro with Parallels 10 and Windows 8.1. The below Settings are specifically for Parallels 10, and you might notice minor changes in other versions. Irrespective of the version of Windows and Parallels you use, this should give a good starting point for you to set up your work machine.
Take a back up: Before you start modifying any settings, it is recommended to take a back up copy of your virtual machine. You will find a *.pvm file within your parallels folder. Make a copy of this and save it some where safely such that you can easily roll back to your existing virtual machine state.
Parallels-pvm-backup
Configure for Design: In the newer versions, Parallels has introduced an out of the box option to specify your intent for the virtual machine. This option is available while you configure the virtual machine or you can change it later from the General Settings. It is recommended to select "Design" from the options for best results while using any CAD software.
 Parallels-configure-for-Design
In addition to this, let us take a look at some of the other settings that are very important. All these setting are accessible by selecting the "Settings" of the virtual machine. There are four main tabs General, Options, Hardware and Security. We are going to focus on some key parameters within the Options and Hardware Tabs.
Virtual Machine Performance Options: Parallels provides options to tune for performance and power usage.   I would recommend selecting "Faster Virtual Machine" and "Better Performance" for best results. Rest of the Settings within Options didn't seem to make too much impact, so I kept the default configurations.
Parallels-options-optimization
Hardware: I have found couple of settings within the Hardware tab to be the key for good graphics, especially when you are navigating 3D models. First is the CPU & Memory numbers. I have 16 GB of RAM on my machine and I have noticed the best performance when I dedicate 9-11GB for the virtual machine to go with 2 CPUs. There are some benchmark tests available on the web that point to this setting.
Parallels-hardware-cpu and memory
Next is the Video memory, and dedicating ~1GB of Video memory and using DirectX10 has worked quite well for me. What is more important is the Resolution. It is recommended to uncheck the 'Enable Retina resolution' box. On Windows 7, instead of this checkbox you will be presented with three options - Scaled, Best for Retina, More Space. I have found the 'Scaled' option to work very well.
Parallels-Video options
I think you are all set to take your newly tuned Windows virtual machine for a spin. Let us start in a Window mode or Full Screen mode (I never really liked the Coherence mode of Parallels). You can try what you like from the View options.
Parallels-window-view
Couple of final tweaks to the Windows settings and you are all set. I typically run Windows in a 1440X900 Screen Resolution. And from the PC System Properties, I set Windows to 'Adjust for Best Performance'. 
Windows-best for performance
Restart Windows if necessary and you are ready to Glue it! 
- See more at: http://the360view.typepad.com/blog/2015/02/optimizing-parallels-settings-for-autodesk-bim-360-glue-autodesk-navisworks.html#sthash.B21lVsVv.dpuf

Comments

Post a Comment

Popular posts from this blog

Navisworks 2018 Database Link w/ Excel - Primer

Image
For this demo, I am going to use the Gatehouse sample file that ships with Navisworks 2018. You can find the files C:\Program Files\Autodesk\Navisworks Manage 2018\Samples\Gatehouse\. If you have a newer or older version of Navisworks, the process basically works the same. The Process In order to connect an external data source such as an Excel spreadsheet or an Access database to a Navisworks model, we need to configure a DataTools within Navisworks. We will then be configuring the database connection. When working with the DataTools in Navisworks, there are a few very important rules to keep in mind. If you are using a 32-bit workstation, then you need to utilize the 32-bit ODBC drivers. 64-bit workstations need to utilize 64-bit ODBC drivers. It is also important to note, that the link to Navisworks is one way. Data can be linked and viewed inside of Navisworks, but the data can’t be updated within Navisworks. My workstations are all Windows 10 64-bit workstations. My PC’s are using
Read more

Navisworks - Multiple Iterations and Locked Files

Image
While working in Navisworks and you find that you are updating your models frequently, you have probably ran into the issue of having to close your Navisworks model in order to update your appended model. There is a quick way to get around this. In the Options Editor >  Model   > Performance , make sure “Close NWC/NWD Files on Load” is checked. This will now allow you to overwrite NWC files without unloading them in your NWF file. So when you have an updated NWC that has overwritten the existing file, you just need to refresh Navisworks for the new model(s) to load.
Read more